• DESCRIPTION
  • SPECIFICATIONS
  • SPARE PARTS

TECHNICAL FEATURES

TECHNICAL FEATURES  
Protective gas CO2 or Mix
Voltage class L
CoolingAir
Wire diameter 0.6 – 0.8 – 1.0 – 1.2
Working cycle 60% 200A CO2 – 150A Mix

The MIG/MAG welding process is a continuous process in which the weld pool protection is guaranteed by a cover gas flowing from the torch onto the part to be welded. Being a continuous process ensures high productivity of the process itself, and at the same time the presence of gas allows for operation without scorching (both these features increase the affordability of the electrode welding process).

  • Dual-function torch: to form the arc between the wire and the piece and bring the protection gas on the weld pool Mass
  • Arc current generator (in modern machines, the check of arc characteristics is carried out electronically)
  • Feeding mechanism and check that the
  • Reel wraps the
  • Protection gas cylinder.

MIG/MAG WELDING APPLICATIONS

MIG/MAG welding is used when high productivity and a high degree of flexibility are required. With this technology, it is possible to weld both austenitic and ferritic steels, light metal alloys (Al and Mg), copper alloys, nickel alloys and titanium alloys. Since the weld pool protection is guaranteed by a gas flow, this procedure is only recommended in workshops, as even moderate wind can cause dispersion of the gas flow with a resulting reduction in the quality of the welded joint. It is possible in some cases to work outside, making protective domes around the area to be welded.

CodeDescriptionWeight (kg)No.pcs
9T01130ETW1 Torch 10 ft. Euro connection2.301
9T01140ETW1 Torch 12 ft. Euro connection2.601
9T01145ETW1 Torch 15 ft. Euro connection2.901
CodeDescriptionNo.No.pcs.
9T016160CComplete conductor tube TW111
9T0171AConductor tube insulation TW131
9T0151Gas diffuser TW1450
9T02011506CContact tip M6x25 ø 0.6520
9T02011508CContact tip M6x25 ø 0.8520
9T02011510CContact tip M6x25 ø 1.0520
9T02011512CContact tip M6x25 ø 1.2520
9T012137Self insul. nozzle ø 10mm610
9T012150Self insul. nozzle ø 13mm710
9T012162Self insul. nozzle ø 16mm810
9T0181Handel case with screws101
9T0191Trigger switch with blades111
9T0191ATrigger switch without blades11a1
9T0191CSwitch blades set TW111b1
9T011416SCable support TW1 spring121
9T0120110EReplac. Cable TW1 25 mm 2 10 ft.171
9T0120112EReplac. Cable TW1 25 mm 2 12 ft.171
9T0120115EReplac. Cable TW1 25 mm 2 15 ft.171
9TBW195Small connector case211
9TEA331Spring for small connector case221
9T023004CNut for case231
9T023005TWEuro connector for TW 12x1241
9T014240455WIPWip liner ø 0.8/1.0 – 4.5 m 251