• DESCRIPTION
  • SPECIFICATIONS
  • SPARE PARTS

TECHNICAL FEATURES

TECHNICAL FEATURES  
Protective gas CO2 or Mix
Voltage class L
CoolingAir
Wire diameter 0.6 – 0.8 – 1.0 – 1.2
Working cycle 60% 250A CO2 – 150A Mix

The MIG/MAG welding process is a continuous process in which the weld pool protection is guaranteed by a cover gas flowing from the torch onto the part to be welded. Being a continuous process ensures high productivity of the process itself, and at the same time the presence of gas allows for operation without scorching (both these features increase the affordability of the electrode welding process).

  • Dual-function torch: to form the arc between the wire and the piece and bring the protection gas on the weld pool Mass
  • Arc current generator (in modern machines, the check of arc characteristics is carried out electronically)
  • Feeding mechanism and check that the
  • Reel wraps the
  • Protection gas cylinder.

MIG/MAG WELDING APPLICATIONS

MIG/MAG welding is used when high productivity and a high degree of flexibility are required. With this technology, it is possible to weld both austenitic and ferritic steels, light metal alloys (Al and Mg), copper alloys, nickel alloys and titanium alloys. Since the weld pool protection is guaranteed by a gas flow, this procedure is only recommended in workshops, as even moderate wind can cause dispersion of the gas flow with a resulting reduction in the quality of the welded joint. It is possible in some cases to work outside, making protective domes around the area to be welded.

CodeDescriptionWeight (kg)No.pcs
9T01230ETW2 Torch 10 ft. Euro connection2.901
9T01240ETW2 Torch 12 ft. Euro connection3.301
9T01245ETW2 Torch 15 ft. Euro connection3.701
CodeDescriptionNo.No.pcs.
9T0162A60C Complete conductor tube 60° TW211
9T0172AConductor tube insulation TW231
9T0152FNGas diffuser TW2450
9T0114H30CContact tip ø 0.8 mm520
9T0114H40CContact tip ø 1.0 mm520
9T0114H45CContact tip ø 1.2 mm520
9T0114H52CContact tip ø 1.4 mm520
9T0114H116CContact tip ø 1.6 mm520
9T0134CTNozzle insul. for CT TW4620
9T0124CT62CCoarse thread nozzle ø 16 mm710
9T012362Self insul. Nozzle ø 16 mm810
9T0182Handle case with screws91
9T0192Trigger switch with blades101
9T0192CSwitch blades set10A1
9T011426SCable support TW2 spring111
9T0120210EReplac. Cable TW2 35 mm 2 10 ft.141
9T0120212EReplac. Cable TW2 35 mm 2 12 ft.141
9T0120215EReplac. Cable TW2 35 mm 2 15 ft.141
9TBW195Small connector case151
9TEA331Spring for small connector case161
9T023004CNut for case191
9T023005TWEuro connector for TW 12x1201
9T014240455WIPWip liner ø 0.8/1.0 – 4.5 m 211